Boiler repair near you

No heating, no hot water or low boiler pressure. See typical prices and find Gas Safe engineers near you.

Find your town

What a gas engineer can help with

By law, only a Gas Safe registered engineer can work on your gas boiler, cooker or fire. These are the jobs local gas engineers handle most.

Boiler repair

No heating, no hot water, fault codes, strange noises or pressure that keeps dropping. Diagnosed and repaired.

Annual boiler service

A yearly service keeps your boiler safe, efficient and within its manufacturer warranty.

Landlord gas safety certificate

Annual CP12 gas safety checks for rented homes, covering every gas appliance and flue.

New boiler installation

Combi, system and regular boilers supplied and fitted, with old units removed and the system flushed.

Central heating and radiators

Cold radiators, power flushing, new radiators, valves and smart thermostats.

Gas cookers and hobs

Gas cookers and hobs connected, moved or safely disconnected.

How much does boiler repair cost?

Typical UK guide prices, so you know what a fair quote looks like.

Boiler service

£80-£130

Once a year. Often cheaper bundled with a gas safety check.

Boiler repair

£150-£400

Depends on the part. Diagnosis alone is often £80-£120.

Gas safety certificate

£60-£100

Landlord CP12 for a typical home.

New combi boiler

£2,000-£4,000

Supplied and fitted, depending on brand and pipework.

Guide prices only. London and the South East are usually higher, and your price depends on the job, access and materials.

How to find a gas engineer near you

  1. Describe the job

    Write down what needs doing, with photos if you can, so every quote covers the same work.

  2. Get three quotes

    Contact at least three local gas engineers and ask for a written, itemised quote.

  3. Check before you hire

    Compare prices, check insurance and registrations, and ask to see recent work.

Before you hire a gas engineer

Gas work is one of the few trades with a legal register, so always check it.

  • Ask to see the engineer's Gas Safe ID card. The back lists the appliances they are qualified to work on.
  • You can check any engineer's registration on the Gas Safe Register website.
  • Ask whether the repair or installation keeps your manufacturer warranty valid.
  • For a new boiler, get a written quote naming the exact boiler model and what is included.

Gas engineer FAQs

What should I do if I smell gas?

Call the National Gas Emergency Service on 0800 111 999 straight away (England, Scotland and Wales). Do not use switches or naked flames, open doors and windows, and turn off the gas at the meter if you can.

Why has my boiler lost pressure?

Usually a small leak, a faulty pressure relief valve or after bleeding radiators. You can often top it back up to 1-1.5 bar using the filling loop. If it keeps dropping, book an engineer.

How often should my boiler be serviced?

Once a year. Most manufacturers require an annual service to keep the warranty valid, and it catches faults before the cold weather arrives.

Should I repair or replace my boiler?

If your boiler is over 12 to 15 years old, needs an expensive part or breaks down often, replacing it is usually better value. A modern boiler can also lower your gas bills.

Can any plumber fix my boiler?

No. Only Gas Safe registered engineers can legally work on gas appliances. Many plumbers are registered, but always check their ID card first.